Saint Gobain Gyproc Instant Plaster Bond

Gyproc BOND-it is a bonding agent for Gypsum plaster & Sand cement plaster that enables preparation of ceiling and wall surfaces (especially RCC surfaces) within 24 hours. Gyproc BOND-it eliminates risk of debonding gypsum plaster or sand cement plaster from ceiling (RCC surface) due to its low suction background and continuously under pressure of gravity. It enables dual benefits of mechanical and chemical bonding, and completely eliminates the labour intensive hacking process and the risk of plaster de-bonding.

Gyproc BOND-it increases pull out strength by 5 times against conventional hacking process. New technology like aluminium formwork shuttering needs products like Gyproc BOND-it to provide adhesion of Gypsum plastering.

• Dual Bonding Chemical and Mechanical Key
• Single Coat brush application
• No Tackiness required
• Green Colour

• 2X more strength
• 10X faster Application
• Easy Supervision

• Background Preparation:Surface on which BOND-it application to be done should be clean, dry and free from mold oil or any other agents. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Just before application of BOND-it, prewetting must be done with the help of a brush/roller.
• Mixing:Mix material properly with clean rod to properly distribute solid particles in the solution.
• Application:Use good quality paint brush. The brush should be cleaned with enough water immediately after use. Apply with even distribution of fine aggregates over the surface. Allow it to dry thoroughly for around 24 hours.